Detailed Product Description

Solderable Polyurethane ECCA Wire

1. DC resistivity: the DC resistivity of Bokai copper-clad aluminum enameled wire is 1.40-1.45 times that of the pure copper wire; for equivalent resistance value, the weight of copper-clad aluminum wire is only 1/2 that of the pure copper wire.

2. Supreme solderability: with a coat of pure coat, the copper-clad aluminum enameled wire boasts the same brazeability as the pure copper wire, no need for special treatment; meanwhile, Bokai copper-clad aluminum enameled wire is coated with a thick copper layer to ensure that the solderability shall not be harmed during the scrape;

3. Light weight: the density of Bokai copper-clad aluminum enameled wire is only 1/2.5 that of the pure copper wire of the same diameter, which can efficiently reduce the weight of coil; the replacement of copper wire with Bokai cop.per-clad aluminum enameled wire can realize a cost saving of more than 30%

Product performance ratio: .

1. Copper-clad aluminum wire high-frequency skin depth property

Current of high-frequency shall mainly be transmitted via the surface layer, which shall result in the so-called skin effect, while the current transmitted via the core of the conductor is very little or even no. The depth of current accumulated in the surface layer of the conductor can be indicated by skin depth δ. The skin depth of copper wire can be computed by the following equation:

δ=67/f1/2mm, where f refers to frequency (Hz)

The thinnest copper layers of cooper-clad aluminum wire commonly used in coaxial cable and the skin depths of current transmitted in the frequency of 5100MHz are as follows:

2. Performance comparison among copper-clad aluminum wire, pure copper wire and pure aluminum wire

Solderable polyurethane copper-clad aluminum enameled wire:

Solderability means that the wire can be soldered directly without the removal of paint film; small dielectric loss angular tangent; boasts the merits of drawing and bending with no pitting. The product can be widely used in the winding of electronic transformer, electronic coil, relay, micro-motor, coil of high-frequency electronic apparatus and other electronic apparatus